Garrett CS 5000 Walk-Through Metal Detector

Item # 1167200

The Garrett CS 5000 walk-through metal detector from Blue Monster Prep is one of the industry's most economical and effective walk-through metal detectors. Its microprocessor technology offers greater sensitivity for detecting weapons from the archway to the floor. It is constructed with attractive scratch and mar-resistant laminate with resilient end caps to endure high-volume security checkpoint usage.

Features

• Microprocessor technology incorporated in detection and control circuitry offers greater sensitivity to weapons screening.

• 20 standard programs for multiple security applications.
There is no need to change software to change security applications.

• Overhead control unit: LCD, alarm light, LED bar graph and control touchpads—plus all wiring, connections and electronics—are integrated into a single external overhead control box compartment to eliminate wire exposure and the external control box.

• Control Outputs: Solid state switches (low voltage AC or DC) for operating external alarms and control devices.

• Uniform coverage from archway to floor.

• Greater sensitivity for detecting metal weapons—maximum of 200 distinct sensitivity levels.

• Continuous online report of operating status.

• Three levels of ankle-boost sensitivity.

• Automatic self-diagnostic function reports failures on the LCD.

• Noise reduction to prevent false alarms.

• Interference Suppression: 100% sensor coil Faraday shielding; special Garrett built-in circuitry for noise suppression and ignoring x-ray monitor.

• Traffic Counter: built-in and resettable with current reading available on LCD panel.

• Infrared Sensor: improves analysis of detection signal; increases throughput; helps eliminate "false alarms" and also provides accurate traffic counter.

• Synchronization: Multiple channels permit several CS 5000s and other Garrett detectors to operate simultaneously in close proximity.

• Alarms: ready light indicates unit is operational; alarm lights and audible alarms are activated when the target amount of metal is detected; LED bar graph indicates amplitude of alarm signal.

• Tamper proof settings: Dual-level access codes required to set or change all sensitivity settings and detection programs; one level for use by supervisors in selecting programs and sensitivity and the other for initial set-up and overall control; non-resettable sequence code logs all changes made whenever sensitivity codes are accessed. An audible alarm reports unauthorized attempts at access.

• Interference Suppression: 100% sensor coil Faraday shielding; special Garrett built-in circuitry for noise suppression and ignoring x-ray monitor.

• Rugged, lightweight design for simple maintenance and easy portability.

• Easy assembly: designed with only four (4) pieces and eight (8) screws. Simple-to-follow instructions.

• Optional battery pack for use anywhere; provides up to 20 hours of backup.

Technical Specifications

• Temperatures:
• Operating: -4° F (-20° C) to +140° F (60° C)
• Humidity to 95% non condensing
• Storage: -40° F (-40° C) to 158° F (70° C)

• Power: Fully automatic 100 to 240 VAC, 50 or 60 Hertz, 14 watts; no rewiring, switching or adjustments required. Power supply meets UL, CSA, TUV and VDE standards.

• Weatherproofing / Foreign Object Protection Standards:

Meets IP 31, IEC Standard. "Degrees of Protection provided by Enclosures", IEC 529.

Dimensions

Passageway Interior Size

Width: 30”

Height: 80”

Depth: 23”

Overall Exterior Size

Width: 35”

Height: 87”

Depth: 23”

Shipping Size

Width: 35.5”

Height: 91.5”

Depth: 6.25”

Shipping Weight

135 lbs. (61.2 kg)

*Oversize/Overweight shipping charges apply