Garrett CS 5000 Walk-Through Metal Detector

Product Description

Item # 1167200

The Garrett CS 5000 walk-through metal detector from Blue Monster Prep is one of the industry's most economical and effective walk-through metal detectors. Its microprocessor technology offers greater sensitivity for detecting weapons from the archway to the floor. It is constructed with attractive scratch and mar-resistant laminate with resilient end caps to endure high-volume security checkpoint usage.



  • Microprocessor technology incorporated in detection and control circuitry offers greater sensitivity to weapons screening.
  • 20 standard programs for multiple security applications.
There is no need to change software to change security applications.
  • Overhead control unit: LCD, alarm light, LED bar graph and control touchpads—plus all wiring, connections and electronics—are integrated into a single external overhead control box compartment to eliminate wire exposure and the external control box.
  • Control Outputs: Solid state switches (low voltage AC or DC) for operating external alarms and control devices.
  • Uniform coverage from archway to floor.
  • Greater sensitivity for detecting metal weapons—maximum of 200 distinct sensitivity levels.
  • Continuous online report of operating status.
  • Three levels of ankle-boost sensitivity.
  • Automatic self-diagnostic function reports failures on the LCD.
  • Noise reduction to prevent false alarms.
  • Interference Suppression: 100% sensor coil Faraday shielding; special Garrett built-in circuitry for noise suppression and ignoring x-ray monitor.
  • Traffic Counter: built-in and resettable with current reading available on LCD panel.
  • Infrared Sensor: improves analysis of detection signal; increases throughput; helps eliminate "false alarms" and also provides accurate traffic counter.
  • Synchronization: Multiple channels permit several CS 5000s and other Garrett detectors to operate simultaneously in close proximity.
  • Alarms: ready light indicates unit is operational; alarm lights and audible alarms are activated when the target amount of metal is detected; LED bar graph indicates amplitude of alarm signal.
  • Tamper proof settings: Dual-level access codes required to set or change all sensitivity settings and detection programs; one level for use by supervisors in selecting programs and sensitivity and the other for initial set-up and overall control; non-resettable sequence code logs all changes made whenever sensitivity codes are accessed. An audible alarm reports unauthorized attempts at access.
  • Interference Suppression: 100% sensor coil Faraday shielding; special Garrett built-in circuitry for noise suppression and ignoring x-ray monitor.
  • Rugged, lightweight design for simple maintenance and easy portability.
  • Easy assembly: designed with only four (4) pieces and eight (8) screws. Simple-to-follow instructions.
  • Optional battery pack for use anywhere; provides up to 20 hours of backup.


Technical Specifications

  • Temperatures:
  • Operating: -4° F (-20° C) to +140° F (60° C)
  • Humidity to 95% non condensing
  • Storage: -40° F (-40° C) to 158° F (70° C)
  • Power: Fully automatic 100 to 240 VAC, 50 or 60 Hertz, 14 watts; no rewiring, switching or adjustments required. Power supply meets UL, CSA, TUV and VDE standards.
  • Weatherproofing / Foreign Object Protection Standards:

Meets IP 31, IEC Standard. "Degrees of Protection provided by Enclosures", IEC 529.




Passageway Interior Size

Width: 30”

Height: 80”

Depth: 23”


Overall Exterior Size

Width: 35”

Height: 87”

Depth: 23”


Shipping Size

Width: 35.5”

Height: 91.5”

Depth: 6.25”


Shipping Weight

135 lbs. (61.2 kg)


*Oversize/Overweight shipping charges apply

$ 3,699.50